[nsp] OSPF Problems with Extreme Switches and Cisco Routers .

[Daniel Concepcion]

Thks to all for your responses,
Finally was a problem with the ExtremeWare version.
Now with the last version all is working ok

Regards,
Daniel


On Tuesday 21 January 2003 15:20, Rich Sena wrote:
> Change your EXTREMEWARE version - you are tripping over a bug in their
> earlier code.  I would go with nothing earlier than 6.1.8b16 but would
> rather recommend a version of 6.2.2 (currentlyt in b56).
>
> On Jan 21, 2003 Daniel Concepcion spake:
> > Hi People,
> >
> > I have the following problem:
> > When I connect two cisco routers to the Extreme switch and use dot1q vlan
>
> for
>
> > interconnect the two routers.  The OSPF adjacency in the cisco routers
>
> change
>
> >  every few minutes.
> >
> > A router: Loading to Full
> > B Router: Neighbor Down: Dead timer expired
> >
> >
> > I have cfg the vlan with the IP protocol and the ports are also in use in
> > other vlan as untag without any problem and with the extreme talking ospf
> > with the cisco routers without issues.
> >
> > Do you know if i need cfg the vlan in the extreme with any special ?
> > Is out there any know issue with this configuration, I don't find
> > anything
> >
> :(
> :
> > If we use cisco switches and dot1q i don't have any problem.
> >
> >
> > We use cisco 12.0.23S over 7507 and 7206. ( we get the same problem with
>
> other
>
> > IOS version)
> > And  Extremeware Version 6.1.5 (Build 20) over Summit48i
> >
>