[nsp] Cisco 7513 OC3 back to back configuration

[Oliver Boehmer (oboehmer)]

wrt clocking:
http://www.cisco.com/warp/public/127/POS/posclocking_16181.html actually
recommends to use "internal <-> internal" for back-to-back/DF/DWDM
links.
But using "internal <-> line" works just as well in most situations (I
have never seen one where it doesn't).

	oli

> -----Original Message-----
> From: Ezequiel Carson [mailto:ezequiel at ifxnw.com.ar] 
> Sent: Dienstag, 4. Februar 2003 13:42
> To: Edward S. Desouza
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [nsp] Cisco 7513 OC3 back to back configuration
> 
> 
> Yes ,its possible, just put one as master for the clock reference.
> 
> 
> Regards
> Ezeq.
> 
> On Tue, 2003-02-04 at 08:45, Edward S. Desouza wrote:
> > Hello,
> > I have two cisco 7513 boxes with OC3 POS interfaces.
> > is it possible to conenct the two boxes back to back
> > by just interchanging TX and RX fibers ? or do I need
> > to conenct the POS interfaces by OADM's ?
> > 
> > 
> > Regards,
> > Edward
> > 
> > 
> > =====
> > Edward S. Desouza
> > 23/24 Manali 5,
> > Evershine Nagar,
> > Malad (W),
> > Bombay 400064.
> > Tel :9122-8886362
> > 
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> > http://mailplus.yahoo.com
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>