[nsp] 12.0(23)S and SNMP ?
Bulger, Tim
TBulger at ea.com
Wed Feb 5 07:54:06 EST 2003
I have seen similar behavior with linux boxes running Net-SNMP. The
requests were being accepted, but the replies were sourced from an
interface IP instead of the loopback. Very annoying.
-----Original Message-----
From: Pierfrancesco Caci [mailto:p.caci at seabone.net]
Sent: Wednesday, February 05, 2003 12:36 AM
To: Cisco-NSP
Cc: francesco.ranzani at italtel.it; s.digiacomo at seabone.net
Subject: Re: [nsp] 12.0(23)S and SNMP ?
:-> "Clinton" == Clinton Work <work at scripty.com> writes:
> Are you using SNMP against the routers loopback interface?
Yes
> Sounds like bug-id CSCdz27562.
Ok, I confirm that this same behaviour is present on a cisco 7513 with
12.0(23)S:
pieffe at paperino:~ $ snmpwalk -v 2c -c my-comm ip-addr-of-an-interface
system
SNMPv2-MIB::sysDescr.0 = STRING: Cisco Internetwork Operating System
Software
IOS (tm) RSP Software (RSP-PV-M), Version 12.0(23)S, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright
(c) 1986-2002 by cisco Systems, Inc. Compiled Sat 26-Oct-02 18:4
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9.1.291
SNMPv2-MIB::sysUpTime.0 = Timeticks: (188680328) 21 days, 20:06:43.28
SNMPv2-MIB::sysContact.0 = STRING: tech at seabone.net
SNMPv2-MIB::sysName.0 = STRING: R_7513A-BR_BRU04.bru.seabone.net
SNMPv2-MIB::sysLocation.0 = STRING: Bruxelles SNMPv2-MIB::sysServices.0
= INTEGER: 6 SNMPv2-MIB::sysORLastChange.0 = Timeticks: (0) 0:00:00.00
pieffe at paperino:~ $ snmpwalk -v 2c -c my-comm loopback-addr system
Timeout: No Response from bru4
Using the suggested workaround is obviously bullshit... every monitoring
software would be confused and think it is a new machine.
Pf
> On Tue, Feb 04, 2003 at 04:51:31PM +0100, Pierfrancesco Caci
wrote:
>>
>> Are there any known issues with retrieving data from 7513 running
>> 12.0(23)S using snmp (ucd-snmp version 5.0.6 and 4.2.3, on debian
linux) ?
>>
>> I'm no longer able to monitor a few routers that received an IOS
>> upgrade, all the rest remained the same (configuration on the
router,
>> mrtg, manual snmpwalk also doesn't work.)
>>
>> Thanks
>>
>> Pf
> --
>
========================================================================
=
> Clinton Work
clinton at scripty.com
> Calgary, Alberta
--
------------------------------------------------------------------------
-------
Pierfrancesco Caci | Network & System Administrator - Certified BOFH
Engineer p.caci at seabone.net | Telecom Italia Sparkle -
http://etabeta.noc.seabone.net/
Linux paperino 2.4.20 #1 Mon Dec 2 17:02:14 CET 2002 i686 GNU/Linux
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list