[nsp] ATM switching on a 7200

[Bob Collie]

Folks--

I've got a spare 7200 that I want to use to allow me to share a single
ATM DS3 between two different providers.  The design is as follows:


	ATM Provider
		|
		| ATM DS-3
		|(pa-a3-t3)
	  +--------+
	  | sw7200 |
	  +--------+
(pa-a3-t3)|     | (pa-a3-t3)
(pa-a3-t3)|     |
     +-------+  |
     | a7200 |  |
     +-------+  |
                | (pa-a3-t3)
	      +--------+
            | b7200  |
            +--------+

What I am trying to do is to take one Virtual Path (VP) from the ATM
provider and send it out from sw7200 to a7200 and then send another VP
from the same ATM provider via sw7200 to b7200.

Any suggestions?  And yes, I know that a LS1010 will do this nicely, but
I'd like to use my existing equipment.

Thanks in advance,
-Bob

PS-I found this as a guide for the LS1010
(http://www.cisco.com/en/US/customer/tech/tk39/tk47/technologies_tech_no
te09186a00800d79b3.shtml)

       

-- 
Bob Collie
Education Networks of America
P: 615-312-6004 F: 615-250-0535