[nsp] ATM switching on a 7200
Bob Collie
bob at ena.com
Fri Feb 7 07:51:29 EST 2003
Agreed; however you can do Frame Relay switching on the 7200 as well as
FR-ATM and vice versa Internetworking at the packet level, so why can't
you do ATM switching?
Anyone from Cisco on the list?
-Bob
-----Original Message-----
From: Kostas Anagnopoulos [mailto:kostas.anagnopoulos at oteglobe.net]
Sent: Friday, February 07, 2003 7:26 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] ATM switching on a 7200
Hi,
Correct me if i'm wrong but i don't think a router can switch a cell
based only on the vp value,due to the fact that it has to turn cells
into a packet as it receives them from an ATM interface,segment it again
into cells and transmit out to an ATM interface.The router needs an ip
address to bind the packets into a pvc,or some sort of bridging between
ATM interfaces which i don't think is working for a whole vp. A possible
solution could be to terminate (rather than trying to cell
switch) the pvp's on the router sw7200 interfaces and cef-switch on the
individual pvc's.
Regards
Kostas
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list