[nsp] c6500-MSFC Recovery

[Cisco Router]

Hello everybody

"A friend of ours" Has managed to enter a 'transport input none' on the line vty 0 4 instead of on the line console 0, in one of our MSFC-2 routermodules on the C6509.
As the fine administrator he is he wrote "copy running startup", So no. Reloading module 15 will not help.

Is there a way to break the bootsequence on the MSFC and in some way exclude the reading of startup-config? Or has anyone a good tip of how to "break into" the MSFC from the Switchconsole?

We run IOS 12.1.13(E3) on the MSFC and CatOS 6-3-10 on the Supervisor 1A


Regards 
 0x2142 4-ever

_____________________________________________________________
Här börjar internet!
Skaffa gratis e-mail och gratis internet på http://www.spray.se

Träffa folk från hela Sverige på ett och samma ställe - http://chat.spray.se/