[nsp] c6500-MSFC Recovery

[Ryan O'Connell]

On Tue, 04 Feb 2003 15:03:10 +0100 Cisco Router <routermgmt at spray.se> wrote:
> "A friend of ours" Has managed to enter a 'transport input none' on the
> line vty 0 4 instead of on the line console 0, in one of our MSFC-2
> routermodules on the C6509.
> As the fine administrator he is he wrote "copy running startup", So no.
> Reloading module 15 will not help.
> 
> Is there a way to break the bootsequence on the MSFC and in some way
> exclude the reading of startup-config? Or has anyone a good tip of how
> to "break into" the MSFC from the Switchconsole?

Do "switch console" from the CatOS prompt - this will connect you to line
con0 on the MSFC.

-- 
      Ryan O'Connell
Mail: ryan at complicity.co.uk
  CV: http://www.complicity.co.uk/ryancv.pdf
      CCIE #8174