[nsp] Determinining which recursive route is going through a tunnel?

[Stephen Gill]

There's a good reference on Cisco's website.  Try this:

http://www.cisco.com/en/US/partner/tech/tk648/tk365/technologies_tech_no
te09186a0080094690.shtml

-- steve


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Brian Buhrow
Sent: Tuesday, February 11, 2003 11:07 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] Determinining which recursive route is going through a
tunnel?

	Hello.  I have a GRE tunnel setup between two points.  
We are routing OSPF and BGp through this tunnel.  The tunnel keeps
dropping
due to a recursive route, which is being advertised through the tunnel.
Unfortunately, the error message doesn't say which particular route is
the
offending one.  Is there a way to determine this with IOS 12.2(7C)?
-thanks
-Brian
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/