[nsp] My Catalyst 2948G locked

Kevin Kincaid KKincaid at classmates.com
Wed Feb 12 12:17:59 EST 2003


A note worthy observation...I have RMA'd a total of 4 Cisco 2948G back to
Cisco in the past calendar year.  When asked about it, Cisco had no comment
as to the performance of these switches or posible Manf. defect.

Kevin Kincaid

-----Original Message-----
From: isamar at isamarmaia.org [mailto:isamar at isamarmaia.org]
Sent: Friday, January 10, 2003 12:29 AM
To: Cisco-NSP
Subject: [nsp] My Catalyst 2948G locked




This morning my Catalyst 2948G locked completely. No ping in any
interface.
I never imagined that it could happen.

               Head   Total(b)    Used(b)    Free(b)  Lowest(b) Largest(b)
Processor  608ADB40   41231552    8787368   32444184   32246344   32367768
      I/O   3000000   16777216    5841328   10935888   10933212   10355452
     Fast  6088DB40     131072     127800       3272       3272       3228

IOS (tm) L3 Switch/Router Software (CAT2948G-IN-M), Version 12.0(7)W5(15d)
RELEASE SOFTWARE

Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 05-Jun-00 16:16 by integ
Image text-base: 0x60010928, data-base: 0x605B8000

ROM: System Bootstrap, Version 12.0(7)W5(15) RELEASE SOFTWARE

switch uptime is 24 minutes
System restarted by power-on
System image file is "bootflash:cat2948g-in-mz.120-7.W5.15d.bin"

cisco Cat2948G (R5000) processor with 49152K/16384K bytes of memory.
R5000 processor, Implementation 35, Revision 2.1
Last reset from power-on
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3z interface(s)
121K bytes of non-volatile configuration memory.
16384K bytes of processor board Boot flash (Read/Write)

Configuration register is 0x2101




_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list