[nsp] 75xx with VIP2-50 and PA-GE running MPLS VPN's?

[Dennis Dubbelman]

There are two VIP2-50 with each one PA-GE modules inserted.
But I can't see the difference between a real GEIP ?

-------------------------


per2.asd-hp.nl#sh ver
Cisco Internetwork Operating System Software 
IOS (tm) RSP Software (RSP-PV-M), Version 12.0(24)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 17-Jan-03 14:52 by nmasa
Image text-base: 0x40010DD8, data-base: 0x411BA000

ROM: System Bootstrap, Version 11.1(8)CA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
BOOTLDR: RSP Software (RSP-BOOT-M), Version 12.2(11)T2,  RELEASE SOFTWARE (fc1)

per2.asd-hp.nl uptime is 2 minutes
System returned to ROM by reload at 18:29:36 NL Thu Feb 27 2003
System image file is "slot1:rsp-pv-mz.120-24.S.bin"

cisco RSP4 (R5000) processor with 262208K/2072K bytes of memory.
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
Chassis Interface.
2 GEIP controllers (2 GigabitEthernet).
1 FEIP controller (1 FastEthernet).
1 FastEthernet/IEEE 802.3 interface(s)
2 GigabitEthernet/IEEE 802.3 interface(s)
123K bytes of non-volatile configuration memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
20480K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).

Slave in slot 7 is running Cisco Internetwork Operating System Software 
IOS (tm) RSP Software (RSP-PV-M), Version 12.0(24)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 17-Jan-03 14:52 by nmasa
Slave: Loaded from system 
Slave: cisco RSP4 (R5000) processor with 262144K bytes of memory.

Configuration register is 0x2102

per2.asd-hp.nl#

per2.asd-hp.nl#sh diagbus 0
Slot 0:
        Physical slot 0, ~physical slot 0xF, logical slot 0, CBus 0
        Microcode Status 0x4
        Master Enable, LED, WCS Loaded
        Board is analyzed 
        Pending I/O Status: None
        EEPROM format version 1
        GEIP controller, FRU: GEIP=, HW rev 2.03, board revision A0
        Serial number: 18608348  Part number: 73-2167-06
        Test history: 0x00        RMA number: 00-00-00
        Flags: cisco 7000 board; 7500 compatible

        EEPROM contents (hex):
          0x20: 01 21 02 03 01 1B F0 DC 49 08 77 06 00 00 00 00
          0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00

        Slot database information:
        Flags: 0x4      Insertion time: 0x427C (00:02:28 ago)

        Controller Memory Size: 128 MBytes DRAM, 8192 KBytes SRAM

        PA Bay 0 Information:
                Gigabit-Ethernet PA, 1 ports, FRU: PA-GE=
                EEPROM format version 1
                HW rev 1.00, Board revision A1
                Serial number: 18619036  Part number: 73-3144-03 

        --Boot log begin--

Cisco Internetwork Operating System Software 
IOS (tm) VIP Software (SVIP-DW-M), Version 12.0(24)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 17-Jan-03 15:15 by nmasa
Image text-base: 0x60010BB8, data-base: 0x60460000


        --Boot log end--

per2.asd-hp.nl#sh diagbus 1
Slot 1:
        Physical slot 1, ~physical slot 0xE, logical slot 1, CBus 0
        Microcode Status 0x4
        Master Enable, LED, WCS Loaded
        Board is analyzed 
        Pending I/O Status: None
        EEPROM format version 1
        GEIP controller, FRU: GEIP=, HW rev 2.03, board revision A0
        Serial number: 18616506  Part number: 73-2167-06
        Test history: 0x00        RMA number: 00-00-00
        Flags: cisco 7000 board; 7500 compatible

        EEPROM contents (hex):
          0x20: 01 21 02 03 01 1C 10 BA 49 08 77 06 00 00 00 00
          0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00

        Slot database information:
        Flags: 0x4      Insertion time: 0x427C (00:03:13 ago)

        Controller Memory Size: 128 MBytes DRAM, 8192 KBytes SRAM

        PA Bay 0 Information:
                Gigabit-Ethernet PA, 1 ports, FRU: PA-GE=
                EEPROM format version 1
                HW rev 1.00, Board revision A1
                Serial number: 18598977  Part number: 73-3144-03 

        --Boot log begin--

Cisco Internetwork Operating System Software 
IOS (tm) VIP Software (SVIP-DW-M), Version 12.0(24)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 17-Jan-03 15:15 by nmasa
Image text-base: 0x60010BB8, data-base: 0x60460000


        --Boot log end--

per2.asd-hp.nl#

-----Original Message-----
From: Oleksandr Pantus [mailto:alx at vsmu.vinnica.ua]
Sent: Thursday, February 27, 2003 6:30 PM
To: Dennis Dubbelman
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] 75xx with VIP2-50 and PA-GE running MPLS VPN's?


Hello !

On Thu, 27 Feb 2003, Dennis Dubbelman wrote:
> We've got a 7513 with a VIP2-50 and a PA-GE inserted into it ?!?!

Would you be so kind to inform what RSP and IOS do you use for that ?
AFAIK, PA-GE is not supported on VIP2-50.

-- 
S/Y,
Alexander, MD, 			nic-hdl: AJP1-UANIC