[nsp] back to back serial connections

[Ajay Saini]

yep, its working now...

thanks,
Aj
----- Original Message ----- 
From: "Daniel Roesen" <dr at cluenet.de>
To: <cisco-nsp at puck.nether.net>
Sent: Friday, February 28, 2003 3:33 PM
Subject: Re: [nsp] back to back serial connections


> On Fri, Feb 28, 2003 at 01:53:32PM +0100, Ajay Saini wrote:
> > Thanks for replying. I tried giving clock source internal on 7200 but
> > the only option I see under clock is rate
> 
> Yeah, just set e.g. "clock rate 2048", this activated clocking in
> the specified rate.
> 
> 
> regards,
> Daniel
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>