[nsp] Connecting over fibre two sites 5km

[Jared Mauch]

On Thu, Jan 02, 2003 at 03:46:14PM -0500, Krzysztof Adamski wrote:
> I want to connect two location over fibre, they are separated by about 5km.
> I need 100mbps and the ability to pass VLANs in a trunk between two 2924M
> switches.
> Based on my research of cisco web site a pair of 2924M(that I already
> have) with WS-X2931 and WS-G5486 should work.
> But that is at 1 gig and a bit of an overkill.
> 
> Any better ideas, and anything else I need to worry about?

	i assume you have singlemode, correct?

	you can see lack of ability for signal to work
if it's multimode and over 2km if i recall correctly.

	- jared

-- 
Jared Mauch  | pgp key available via finger from jared@puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.