[nsp] My Catalyst 2948G locked

Gert Doering gert at greenie.muc.de
Fri Jan 10 12:21:27 EST 2003


Hi,

On Fri, Jan 10, 2003 at 11:49:40AM +0100, sthaug at nethelp.no wrote:
> > We have a customer that is also using a 2948G-L3, and it also locks up
> > every now and then.  The chassis has already been swapped, various IOS
> > versions tested (right now we're at cat2948g-in-mz.120-14.W5.20.bin) but
> > still the problem persists.
> 
> We had lots of problems with our two 2948G-L3 boxes until we stopped
> using them as L2 devices, and simply ran them as hardware speed routers.

Hmmm.  This is going to be tricky in our customer's setup, but I'll spend
some thinking on this.

Any comments from Cisco about this?

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert.doering at physik.tu-muenchen.de


More information about the cisco-nsp mailing list