[nsp] IOS on a sup1a-msfc for 6148-GE-TX

dre andre at operations.net
Wed Jul 2 18:16:53 EDT 2003


On Wed, Jul 02, 2003 at 03:35:20PM -0500, Mike Carter wrote:
> Hello all...
> 
> What OS is required to run the new 10/100/1000 blades in a 6509 a
> SUP1A-MSFC.
> 
> AS ALWAYS ANY HELP WOULD BE GREATLY APPRECIATED.

This question has already been answered on this list.  Please
search the archives for the full details.

The simple answer is that the 6148-GE-TX is only supported under
CatOS 7.5(1) for the Sup1/Sup1a, but this code requires 128M DRAM
on the SUP (so you might as well upgrade to Sup2) for CatOS-only
or Hybrid.

If you are using Native IOS, it is currently unsupported on all
platforms... including Sup1/Sup1a, Sup2 and Sup720.  However, it
will supported in September or so for at least the Sup2 and Sup720
platforms (Sup1/Sup1a is not going to be supported beyond 12.1.19E2,
for Native IOS only, with the only exception being minor revisions
for security/critical bug fixes).

dre



More information about the cisco-nsp mailing list