[nsp] Why can't I default Originate?

Streiner, Justin streiner at stargate.net
Tue Jul 8 18:07:29 EDT 2003


On Tue, 8 Jul 2003, Vandy Hamidi wrote:

> Here was the problem.  I'm stupid.  I wasn't looking in the right place for what I was advertising.
>
> I ran:
> router#sh ip bgp nei 10.1.2.75 adv
> BGP table version is 43, local router ID is 10.1.80.44
> Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
>               r RIB-failure, S Stale
> Origin codes: i - IGP, e - EGP, ? - incomplete
>
> Originating default network 0.0.0.0

I ran into a similar issue when I ran 12.0/12.1.  Some versions of code
would not originate a default route via BGP - it was a legitimate IOS bug.

jms


More information about the cisco-nsp mailing list