[nsp] catalyst 6509 high percentage procesor usage

Christopher J. Wolff chris at bblabs.com
Tue Jul 15 15:34:27 EDT 2003


Jan,

I've had very good luck with 12.1(8.5)E.  Hope this helps.

Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com 

-----Original Message-----
From: Jan Pechanec [mailto:jp at devnull.cz] 
Sent: Tuesday, July 15, 2003 8:42 AM
To: Christopher J. Wolff
Cc: 'cisco nsp'
Subject: RE: [nsp] catalyst 6509 high percentage procesor usage

On Tue, 15 Jul 2003, Christopher J. Wolff wrote:

>Jan,
>
>Which IOS are you running?  I've seen quite a few CPU usage oddities
>with earlier versions of the hybrid IOS.

	Hi Chris, IOS is as follows:

Cisco Internetwork Operating System Software
IOS (tm) MSFC2 Software (C6MSFC2-PSV-M), Version 12.1(11b)E4, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)

	Jan.

>
>Christopher J. Wolff, VP CIO
>Broadband Laboratories, Inc.
>http://www.bblabs.com
>
>-----Original Message-----
>From: cisco-nsp-bounces at puck.nether.net
>[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jan Pechanec
>Sent: Tuesday, July 15, 2003 7:38 AM
>To: cisco nsp
>Subject: [nsp] catalyst 6509 high percentage procesor usage
>
>
>	Hi all,
>
>	after removal of ATM card (and reinsertion of FlexWAN module),
>our catalyst 6509 suffers from high % processor usage.
>
>WS-C6509-NEB Software, Version NmpSW: 6.3(7)
>Copyright (c) 1995-2002 by Cisco Systems
>NMP S/W compiled on May 16 2002, 17:16:36
>
>	'show proc cpu' showw this:
>
>28  268719062   194854567  609000    93.28%  73.30%  88.90% 0   Fib
>
>	It could just be a coincidence with that card removal, but
>since the switch has 1 year uptime, I doesn't seem to me so. MSFC-2
>running above it is OK. Does anybody already met this kind of
>behaviour? Is there a way how to get rid of it except of reload?
>
>	thank you, Jan.
>
>

-- 
Jan Pechanec <jp_at_devnull_cz>



More information about the cisco-nsp mailing list