[nsp] Filtering multicast on Cat2950

[Scott Morris]

What are you attempting to accomplish, and what have you tried so far?

The answer to it being possible or not may depend on specifically what
you are trying to do, but in general, yes, it's possible.
 
Scott Morris, MCSE, CCDP, CCIE4 (R&S/ISP-Dial/Security/C&S) #4713,
CCNA-WAN Switching, CCSP, Cable Communications Specialist, IP Telephony
Support Specialist, IP Telephony Design Specialist, CISSP, JNCIS
CCSI #21903
swm at emanon.com


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Sorin
CONSTANTINESCU
Sent: Wednesday, July 16, 2003 9:52 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] Filtering multicast on Cat2950



Hi,

I want to filter multicast on a FastEthernet interface on a 2950 running
12.1(11)EA1. So far, i haven't been able to accomplish that. Is it
possible to filter multicast on this specific architecture, or not?

TIA
-- 
Sorin CONSTANTINESCU
adonay at dumnez.eu.org
Linux Registered User #222086
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/