[nsp] UBR 7114 testing rig

[Christopher J. Wolff]

I solved part of my problem...when I swapped out my splitter for a
combiner I could see the modem.  Now if I can just get it online.....

Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Christopher J.
Wolff
Sent: Wednesday, July 16, 2003 3:29 PM
To: cisco-nsp at puck.nether.net
Subject: [nsp] UBR 7114 testing rig

Hello,

I have a UBR7114 and a Toshiba cable modem I'm testing for an upcoming
project.  "I've been told" that I can run the upconverter and
downconverter output into a 2 to 1 splitter and plug it right into the
cable modem.  Unfortunately this is not the case.  Has anyone else set
up this type of testing rig with a UBR?  Thank you.

Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com 


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/