[nsp] PA-MC-2T3+ reporting traffic way too high

[Lucas Iglesias]

Hi Jeff,

I had the same issue with a PA-8E1 on a 7513, when the interfaces were
configured with PPP and Multilink the traffic statistics were always
unreliable.
Never found why. Just to test it (if you can), try to see what happens if
you change the encapsulation to hdlc.

Regards, Luckas.-

-----Mensaje original-----
De: Jeff Chan [mailto:cisco-nsp at jeffchan.com]
Enviado el: Lunes, 21 de Julio de 2003 05:57 p.m.
Para: cisco-nsp at puck.nether.net
Asunto: [nsp] PA-MC-2T3+ reporting traffic way too high


Hi All,
A netadmin friend suggested I sign up for this list so I thought
I'd see if you guys had some ideas about a possible bug we're
seeing.

We recently upgraded to 12.2(14)S3 and notice that the traffic
reported on a PA-MC-2T3+ in a 7513 on a VIP-2/50 is way too high:

> supranet01>sh int Serial10/1/1/8:0
> Serial10/1/1/8:0 is up, line protocol is up
>   Hardware is cyBus 2CT3+
>   Description: AA Peering Point #1
>   Internet address is NN/30
>   MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec,
>      reliability 255/255, txload 26/255, rxload 48/255
>   Encapsulation PPP, crc 16, loopback not set
>   Keepalive set (10 sec)
>   LCP Open
>   Open: IPCP
>   Last input 00:00:11, output 00:00:00, output hang never
>   Last clearing of "show interface" counters 16:30:49
>   Input queue: 0/75/0/11 (size/max/drops/flushes); Total output drops:
1569
>   Queueing strategy: fifo
>   Output queue: 0/40 (size/max)
>   5 minute input rate 9545000 bits/sec, 3026 packets/sec
>   5 minute output rate 12496000 bits/sec, 2970 packets/sec
>      2341811 packets input, 778137258 bytes, 0 no buffer
>      Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
>      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 1 abort
>      2477327 packets output, 1393787280 bytes, 0 underruns
>      0 output errors, 0 collisions, 0 interface resets
>      0 output buffer failures, 0 output buffers swapped out
>      2 carrier transitions no alarm present
>   Timeslot(s) Used: 1-24, Transmitter delay is 0 flags, transmit queue
length 5
>   non-inverted data

How can an interface with 1536 Kb of bandwidth report or do 9
and 12 megabits of traffic?  The answer is that it can't.  :)
The 5 minute average values our mrtg is picking up by snmp also
got spikey after the upgrade.  The peak values may be correct
but the average seems missing, filtered out, or too low.

We did turn of cef since it seemed to cause a problem, possibly
with ISL.  (We plan to move to Dot1Q for trunking vlans later.)

Has anyone else seen this?

Cheers,

Jeff C.
-- 
Jeff Chan
mailto:cisco-nsp at jeffchan.com
http://www.jeffchan.com/

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/