[nsp] WU-FTPD and The Cisco router.

[Victor M. Acosta]

 Have any one hear or have problems dealing with WU-FTPD behind cisco
routers (2600) series?
The problem resides in that randomly users get stuck on the hand-shake
between Client-Server
the servers are behind a 2611 router with ISO :
c2600-i-mz.123-1.bin
ROM: System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)
cisco 2611 (MPC860) processor (revision 0x202) with 28672K/4096K bytes of
memory.4
    Then after the Client authenticate I have a denied error and Access-List
101 like this:
02:27:06: %SEC-6-IPAC02:27:06: %SEC-6-IPACCESSLOGRL: access-list logging
rate-limited or missed 2 packets
02:27:11: %SEC-6-IPACCESSLOGP: list 101 denied tcp 216.1.1.1(61777) ->
12.1.11.1(55816), 1 packet

Where we have 216.1.1.1 is the FTP-Client (Any FTP Client Mac/PC )and
12.1.11.1 is the Server (RH 7.2) (wu-ftpd 2.6.2) behind the router. I am let
in traffic to the 12.1.11.1 on ftp-data and ftp. I was researching over the
internet and it seems that some other people that have similar setup had the
same problems. I try their fixes and did not work. I wonder if someone can
point me to the right direction.
Thanks.


Victor M. Acosta                                  El Paso Times
300 North Campbell St.                                 IT
El Paso TX, 79901
Ph. (915) 546-6394                          victorm at elpasotimes.com
Fax.(915) 546-6346                          victorm at eudoramail.com