[nsp] deciphering a GEIP error

[William F. Maton]

Hi folks...

	We have a GEIP in a 7507 running 12.0(25)S1.  The GEIP (I am told)
is new and previously resided in a box for quite some time.  Now we're
seeing the following message produced through show diagbus:

Slot 5:
        Physical slot 5, ~physical slot 0xA, logical slot 0, CBus 0
        Internal Instruction Error, Microcode Status 0x0
        Master Enable, LED, WCS DBUS Cmd Enable, WCS Loading, WCS Loaded
        Board is disabled
        Pending I/O Status: None
        EEPROM format version 1
        GEIP controller, FRU: GEIP=, HW rev 2.03, board revision A0
        Serial number: 17936854  Part number: 73-2167-06
        Test history: 0x00        RMA number: 00-00-00
        Flags: cisco 7000 board; 7500 compatible

        EEPROM contents (hex):
          0x20: 01 21 02 03 01 11 B1 D6 49 08 77 06 00 00 00 00
          0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00

        Slot database information:
        Flags: 0x209    Insertion time: 0xCDB0CD8 (00:36:55 ago)

Does this IOS not support the GEIP, or is the GEIP pretty much dead?

Thanks for any insight....

wfms