[nsp] Multiple OSPF routing on a C6400 NRP1?

[Dennis Peng]

You may be out of memory. Can you check the first page of "show mem"
to see how much you have available?

Dennis

Clayton Zekelman [clayton at MNSi.Net] wrote:
> 
> Just tried to set up a C6400 with an NRP1 with 2 OSPF routing processes,
> and the command parser wouldn't accept the second task.
> 
> When I issued the command "router ospf 1", the parser brought me to the
> (config-router)# prompt, but then, when I issued "router ospf 2", it kept
> me at the (config)# prompt.
> 
> The same syntax works on a 7200/NPE-300 with 12.2(15)T5
> 
> I tried this under 12.2(15)T5 and 12.3(1a) on the 6400/NRP1.  Any idea
> whats up?! 
> 
> ---
> Clayton Zekelman
> Managed Network Systems Inc. (MNSi)
> 344-300 Tecumseh Rd. E.
> Windsor, Ontario
> N8X 5E8
> 
> tel. 519-985-8410
> fax. 519-258-3009
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/