[nsp] 2500's running from ram

[Voralt]

Yes it will.

----- Original Message -----
From: <sthaug at nethelp.no>
To: <cisco-nsp at puck.nether.net>
Sent: Tuesday, July 29, 2003 1:03 PM
Subject: Re: [nsp] 2500's running from ram


> > > Just run unix "compress" on the image (NOT "gzip"!) and store the
> > > resulting "c2500-...bin.Z" file in the flash.  The router will
complain
> > > about "not recommended image type", and you'll run into massive
problems
> > > if you don't have enough RAM...
> >
> > *If* you have enough RAM, it sounds like a good way to force the image
to
> > run from RAM. You become free to manipulate the contents of the flash
> > while the box is running so you don't have to use the flash load helper
> > (or the flash partition trick)
>
> By the way, does anybody know if the same trick will work on 1600 (not
> 1600R) series routers?
>
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>