[nsp] "sh run" give me "Unable to read Configuration.Try Again later" HELP!

[rpcbind at speakeasy.net]

Check memory (sh mem sum), you've likely exhausted everything available.  I'd
look for a bgp neighbor on that box there that you could shutdown or disable
soft-reconfig on long enough to get the router back to a usable state and 
figure out what happened.

On Wed, 30 Jul 2003, mac wrote:

> I all,
> 
> i'm on panic! I have a core router that is working correctly but when i 
> try "sh run"  or "wr" i get:
> 
> "Unable to read Configuration. Try Again later"
> 
> I'm unable to register config changes.
> 
> I want to try to restart the router but i want to be sure that is 
> software problem before that.
> Otherwise  the "sh startup-config" command works correctly.
> 
> Can one give some help with his experiences?
> 
> Mac
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>