[nsp] next-hop-based rate-limit

Vladimir Litovka doka at kiev.sovam.com
Mon Jun 9 10:16:48 EDT 2003


Volodymyr Yakovenko wrote:

>>is it possible to rate-limit traffic on next-hop value? Something like to:
>>
>>int Serial 0/0.17 point-to-point
>>frame-relay interface-dlci 17
>>ip address 192.168.0.1 255.255.255.252
>>[ ... ]
>>!
>>ip route 192.168.1.1 255.255.255.255 192.168.0.2
>>ip route 192.168.1.2 255.255.255.255 192.168.0.2
>>
>>    
>>
>>From 192.168.0.2 I receive announces of some networks, with different 
>  
>
>>next-hops for different networks and need to rate-limit traffic, which 
>>flows through 192.168.1.1 and 192.168.1.2. Can anybody give me clues how 
>>to do this?
>>    
>>
>
>Which routing protocol is used  between 192.168.0.1 and 192.168.0.2?
>

BGP

-- 
:r !ripewhois DOKA-RIPE
-------------------------------------------------------------------------
Never try to teach a pig to sing. It wastes your time and annoys the pig.
                -- Lazarus Long, "Time Enough for Love"




More information about the cisco-nsp mailing list