[nsp] Can PA-CT3/4T1 run multilink?

[lexus]

Jms,

I am trying to get more than 1.5 megs in bandwidth.

-ken

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Streiner, Justin
Sent: Wednesday, June 25, 2003 12:56 PM
To: cisco-nsp at puck.nether.net
Subject: Re: [nsp] Can PA-CT3/4T1 run multilink? 

On Wed, 25 Jun 2003, lexus wrote:

> I am trying to figure out of the older (dual slot) PA-CT3/4T1
> channelized DS3 card can bunble one or more channels to load share
> nxT1's.

Not sure if it'll do ppp multilink, but if not, CEF per-packet
load-sharing works.  It's not quite bundling, but if all you need is to
load-balance across several circuits, it'll work.

jms
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/