[nsp] Can PA-CT3/4T1 run multilink?

[Dennis Peng]

Should work just fine. Turn off fragmentation to lessen the CPU load.

Dennis

lexus [lexus at ince.st] wrote:
> I am trying to figure out of the older (dual slot) PA-CT3/4T1
> channelized DS3 card can bunble one or more channels to load share
> nxT1's.
> 
> The PA-CT3/4T1 is running on a 7206 (non vxr), but if it needs to be,
> can be taken out and put on a VIP2-40 and slap it in a 7500.
> 
> Thanks !
> 
> -ken
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
-------------------------------------------------------------------------
      ||        ||                                 Dennis Peng
      ||        ||        Cisco Systems, Inc.      Escalation Engineer
     ||||      ||||       170 West Tasman Drive    Phone: (408) 526-6143
 ..:||||||:..:||||||:..   San Jose, CA 95134       Fax:   (408) 232-2343
   Cisco Systems Inc.                              dpeng at cisco.com
-------------------------------------------------------------------------