[nsp] 12.0(22)S2 / 12.0(23)S1

[jlewis at lewis.org]

On Tue, 18 Mar 2003, Steven W. Raymond wrote:

> > I've only been running it for about 9 days, so it's too soon to tell, but
> > rsp-pv-mz.122-14.S.bin has been working so far.

Ugh...it seems Cisco just can't get SNMP right.  I was just notified of 
this problem yesterday.

interfaces.ifTable.ifEntry.ifDescr.3 = Serial1/0/0
interfaces.ifTable.ifEntry.ifDescr.4 = Serial1/0/1
...
interfaces.ifTable.ifEntry.ifAdminStatus.3 = up(1)
interfaces.ifTable.ifEntry.ifAdminStatus.4 = up(1)
...
interfaces.ifTable.ifEntry.ifOperStatus.3 = notPresent(6)
interfaces.ifTable.ifEntry.ifOperStatus.4 = notPresent(6)

On the bright side, the all the counters are working (uptime 1 week, 5
days), but some monitoring systems refuse to graph the data for these T3's
as long as the ifOperStatus isn't up.

> What's the difference between 12.0(21)S5, for example, and the 12.2(S)
> series?  Is it the case that 12.2 "features" eventually trickle down
> into the 12.0 line?  Is 12.2 simply the bleeding edge of the S-train? Am

Go to cio.cisco.com/go/fn and do a comparison of releases.  It'll show you 
which features are unique to each version.  The router mentioned above is 
a 7513 dual RSP4 and VIP2-50's.

----------------------------------------------------------------------
 Jon Lewis *jlewis at lewis.org*|  I route
 System Administrator        |  therefore you are
 Atlantic Net                |  
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________