[nsp] Sup II utilization in native

Jared Mauch jared at puck.nether.net
Wed Mar 26 18:28:18 EST 2003

On Wed, Mar 26, 2003 at 03:03:38PM -0800, Steve Francis wrote:
> So how does one tell the Sup II utilization in native mode, either by 
> CLI or snmp?
> I'm setting up netflow data export - the docs say that netflow sampling 
> greatly reduces the load on the Sup II, yet how do I know if I need to 
> reduce my load? Or tell if I have?

Router#sh catalyst6000 traffic-meter 
  traffic meter =   3%  Never cleared
           peak =  13%        reached at 09:22:08 UTC Tue Mar 25 2003
Router#attach 1 
Trying Switch ...
Entering CONSOLE for Switch
Type "^C^C^C" to end this session

Router-sp#sh proc cpu | inc CPU
CPU utilization for five seconds: 10%/0%; one minute: 7%; five minutes: 7%

[Connection to Switch closed by foreign host]

Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.

More information about the cisco-nsp mailing list