[nsp] CBWFQ + 3640 + subinterfaces

[jlewis at lewis.org]

Using c3640-js-mz.122-12.bin, the command is accepted, but does not become 
part of the running config.  i.e. it's accepted and ignored.  I should 
add, this is a subinterface on an ATM DS3.  Perhaps upgrading to 
c3640-js-mz.122-16.bin will fix it?

On Mon, 5 May 2003, Félix Izquierdo wrote:

> 12.2M can do it, and of course 12.2T.
> 
> Félix
> 
> 
> jlewis at lewis.org wrote:
> > Anyone know if there's an IOS for the 3640 that will do service policies 
> > (CBWFQ) on ATM subinterfaces?  I know 12.2S on the 7200 series can do 
> > this...but there is no S for the 3640.  Maybe one of the later 12.2[insert 
> > random letter] trains?
> > 
> > ----------------------------------------------------------------------
> >  Jon Lewis *jlewis at lewis.org*|  I route
> >  System Administrator        |  therefore you are
> >  Atlantic Net                |  
> > _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
> > 
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > 
> > 
> 
> 
> 

----------------------------------------------------------------------
 Jon Lewis *jlewis at lewis.org*|  I route
 System Administrator        |  therefore you are
 Atlantic Net                |  
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________