[nsp] Power requirements for Sup720?

[Brad Bonin]

If you are going to install a Sup720 into an existing chassis, you need
to adhere to the following:

1.  A Fan Tray upgrade is needed to support the Sup720 and new DFC3
modules.  The part numbers for the new fan trays are found in the link
below (e.g. for the 6509, WS-C6K-9SLOT-FAN2).

2.  The new fan trays require 2500W Power Supplies.  So, if you don't
have atleast 2500W PS's, then you will have to upgrade them as well.

The info can be found in the FAQ section below:

http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_q
anda_item09186a0080159963.shtml

Brad

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mahmoud Abo
Elwafa
Sent: Tuesday, May 06, 2003 4:35 AM
To: hroi at asdf.dk; sthaug at nethelp.no
Cc: cisco-nsp at puck.nether.net
Subject: RE: [nsp] Power requirements for Sup720?


With configurator, you will not be allowed less that 2500W
					
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of hroi at asdf.dk
Sent: Tuesday, May 06, 2003 6:53 PM
To: sthaug at nethelp.no
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] Power requirements for Sup720?


<quote who="sthaug at nethelp.no">

> I have been unable to find anything about power requirements for 
> Sup720 on the Cisco web site - and our Cisco rep doesn't know either.

FWIW, I was told by our rep that we had to upgrade our power supplies to
2500W if we went ahead with Sup720..

-- 
Hroi Sigurdsson
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/