[nsp] NetFlow through a firewall?

[Stephen J. Wilcox]

There should be no issue, its just udp .. just make sure you allow the packets 
thro on whatever port you've configured the netflow exports..

Steve

On Wed, 7 May 2003, Temkin, David wrote:

> Has anyone sucessfully passed NetFlow traffic through a firewall?  If anyone
> has any pointers (ie, how to do this securely...) I'd love to hear them.
> 
> Thanks,
> 
> -Dave
> 
> 
> IMPORTANT:The information contained in this email and/or its attachments is
> confidential. If you are not the intended recipient, please notify the
> sender immediately by reply and immediately delete this message and all its
> attachments.  Any review, use, reproduction, disclosure or dissemination of
> this message or any attachment by an unintended recipient is strictly
> prohibited.  Neither this message nor any attachment is intended as or
> should be construed as an offer, solicitation or recommendation to buy or
> sell any security or other financial instrument.  Neither the sender, his or
> her employer nor any of their respective affiliates makes any warranties as
> to the completeness or accuracy of any of the information contained herein
> or that this message or any of its attachments is free of viruses.
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>