[nsp] ATM PVC service policy
jlewis at lewis.org
jlewis at lewis.org
Thu May 8 10:39:00 EDT 2003
It's working for me.
On Thu, 8 May 2003, Spin wrote:
> Hi,
>
> I use 12.2(15)B and yes I can attach a service policy to PVC, the
> question is if that service police works in this way configured. From
> your reply I assume yes. Right?
>
> Spin
>
>
> On Thursday, May 8, 2003, at 03:06 PM, jlewis at lewis.org wrote:
>
> > On Thu, 8 May 2003, Spin wrote:
> >
> >> if I apply a service-policy command to an ATM PVC used for PPPoX
> >> (PPP
> >> session created through virtual-template configurations)
> >> service-policy
> >> works or works only for IP over ATM (RBE bridged)?
> >
> > Depends on the IOS version. 12.2(14)S and 12.2(14)S1 can both assign a
> > service-policy directly to an ATM pvc used for PPPoA using a
> > virtual-template. I don't think you can do this in earlier (than 12.2)
> > IOS.
> >
> > i.e.
> >
> > interface ATM3/0.42 point-to-point
> > pvc 1/42
> > class-vc atm-frame-1.5x384
> > encapsulation aal5mux ppp Virtual-Template21
> > service-policy output voice-policy
> >
> > ----------------------------------------------------------------------
> > Jon Lewis *jlewis at lewis.org*| I route
> > System Administrator | therefore you are
> > Atlantic Net |
> > _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
> >
>
----------------------------------------------------------------------
Jon Lewis *jlewis at lewis.org*| I route
System Administrator | therefore you are
Atlantic Net |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
More information about the cisco-nsp
mailing list