[nsp] ARP table

[Spin]

Thanks,

it was the problem. Adding the ip address resolved the problem.

Thanks
Spin

On Friday, May 9, 2003, at 01:02  PM, Niels Bakker wrote:

> * mac at telvia.it (Spin) [Thu 08 May 2003, 16:30 CEST]:
>> for some days now i have arp table in a edge router full of entries of
>> other networks.
>> This entries comes from a FE interface of our upstream provider. The 
>> FE
>> interface has ip proxy arp, ip redirect, ip direct broadcast all
>> disabled. I'm running 12.2(14)S1.
>> What are going wrong?
>
> Do you have a static route configured with next-hop set to the 
> interface
> instead of the IP address of your upstream provider's router?
>
>
> 	-- Niels.
>
> -- 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>