[nsp]

[Oleksandr Pantus]

Hello !

In order to get .1q vlan1 routing Cisco recommends to bind native
vlan on .1q trunk to some unused vlan.

On Fri, 9 May 2003, Security wrote:

> I spend several hours working with catalyst2950 switch and a Cisco2610
> router trying to configure VLAN trunking using 802.1q. I Discover that when
> one of the VLANs is the default (VLAN1) trunking is not working. Using
> other vlans e.g vlan2 and Vlan3 trunking is working perfectly. According to
> Cisco Documentation trunking should also work with VLAN1 as one of the
> VLANs.
>
> Can anyone advise? I am thinking of a bug on the software of the switch but
> your advice will be appreciated
> _____________________________
> CYTANET WebMail
> http://webmail.cytanet.com.cy
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- 
S/Y,
Alexander, MD, 			nic-hdl: AJP1-UANIC