[nsp] Checking memory on Cisco 7600 with dual Sup2/MSFC2s

[Clinton Work]

I'm trying to determine how much memory the standby MSFC2 has on
a 7600 with dual Sup2s. The "show ver" command lists the memory for the
Standby Sup, but it shows the memory on the standby Sup2 and NOT the standby 
MSFC2. 


I can determine the memory on the other modules using the following
commands.

Active Sup2 (slot1):
 attach 1
 show ver
 exit

Standby Sup2 (slot 2):
 attach 2
 show ver
 exit

OSM module (slot 9):
 show diagbus 9


Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(11b)EX1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 30-May-02 03:28 by eaarmas
Image text-base: 0x40008BD8, data-base: 0x415E0000

ROM: System Bootstrap, Version 12.1(3r)E2, RELEASE SOFTWARE (fc1)
BOOTLDR: c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(11b)EX1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

7600 uptime is 1 week, 8 hours, 42 minutes
System returned to ROM by power-on (SP by power-on)
System restarted at 04:36:55 pdt Sun May 4 2003
System image file is "slot0:c6sup22-psv-mz.121-11b.EX1.bin"

cisco Catalyst 6000 (R7000) processor with 489472K/34816K bytes of memory.
Processor board ID n/a
R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
1  2-port OC12 POS controller  (2 POS).
3 Virtual Ethernet/IEEE 802.3  interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
8 Gigabit Ethernet/IEEE 802.3 interface(s)
2 Packet over SONET network interface(s)
381K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).
Standby is up
Standby has 227328K/34816K bytes of memory.	<-- Standby Sup2, not MSFC2

Configuration register is 0x2102


7600#show mod
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1    2  Catalyst 6000 supervisor 2 (Active)    WS-X6K-SUP2-2GE    n/a
  2    2  Catalyst 6000 supervisor 2 (Standby)   WS-X6K-SUP2-2GE    n/a
  4   48  48 port 10/100 mb RJ45                 WS-X6348-RJ-45     n/a
  5    0  Switching Fabric Module-128 (Active)   WS-C6500-SFM       n/a
  9    4  2-port OC-12c POS SM                   OSM-2OC12-POS-SI   n/a


7600#show diagbus 9
Slot 9: Logical_index 18
        2-port POS-OC12-MM-SR controller
        Board is analyzed ipc ready
        HW rev 1.1, board revision A0
        Serial Number: n/a Part number: 73-4900-05

        Slot database information:
        Flags: 0x2004   Insertion time: 0x37478 (1w0d ago)

        Controller Memory Size:
                480 MBytes CPU Memory
                32 MBytes Packet Memory
                512 MBytes Total on Board SDRAM
        IOS (tm) cwlc Software (cwtlc-DW-M), Version 12.1(11b)EX1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)


-- 
=========================================================================
Clinton Work                                        clinton at scripty.com
Calgary, Alberta