[nsp] Checking memory on Cisco 7600 with dual Sup2/MSFC2s

[Sharan Harkisoon]

Nope, the 6500/7600's all use the same stuff.  You could basically take an
old 6509 with any old SUP engine in it, and upgrade it all the way up to a
SUP720 if you wanted to.

----- Original Message ----- 
From: "Joe Lin" <jlin at doradosoftware.com>
To: "Simon Lockhart" <simonl at rd.bbc.co.uk>; "Ryan O'Connell"
<ryan at complicity.co.uk>
Cc: "Clinton Work" <work at scripty.com>; "Cisco-NSP"
<cisco-nsp at puck.nether.net>
Sent: Sunday, May 11, 2003 7:05 PM
Subject: Re: [nsp] Checking memory on Cisco 7600 with dual Sup2/MSFC2s


> is there a specific msfc you have to run to make your 6500 to a 7600?
>
> or a specific ios train?
>
> -joe
>
>
>
> ---- Simon Lockhart <simonl at rd.bbc.co.uk> wrote:
> > On Sun May 11, 2003 at 09:56:18PM +0100, Ryan O'Connell wrote:
> > > If it's anything like the 6500s, "session 16" should connect you to
the
> > > secondary MSFC. (I've never used a 7600 though...)
> >
> > When I spoke to my pet Cisco tech rep on Friday, he said that the only
> > difference between the 6500 and 7600 was paint on the chassis, and a
> > change of NEBS compliance.
> >
> > Simon
> > -- 
> > Simon Lockhart         |   Tel: +44 (0)1628 407720 (x37720) | Si fractum
> > Technology Manager     |   Fax: +44 (0)1628 407701 (x37701) | non sit,
noli
> > BBC Internet Services  | Email: Simon.Lockhart at bbc.co.uk    | id
reficere
> > BBC Technology, Maiden House, Vanwall Road, Maidenhead. SL6 4UB. UK
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>