[nsp] Rate-limit Problem.

[Volodymyr Yakovenko]

On Tue, May 20, 2003 at 06:25:15PM +0530, Mahesh S wrote:
>Hi,
>
>Millennium>sh ver
>Cisco Internetwork Operating System Software
>IOS (tm) RSP Software (RSP-PV-M), Version 12.0(11)S3, EARLY DEPLOYMENT
>RELEASE S
>OFTWARE (fc1)
[..skipped..]
>cisco RSP4 (R5000) processor with 262144K/2072K bytes of memory.
>R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
>Last reset from power-on
>G.703/E1 software, Version 1.0.
>G.703/JT2 software, Version 1.0.
>Channelized E1, Version 1.0.
>X.25 software, Version 3.0.0.
>Primary Rate ISDN software, Version 1.1.
>Chassis Interface.
>1 FSIP controller (8 Serial).
>1 FEIP2 controller (2 FastEthernet)(0 E1).
>5 VIP2 R5K controllers (20 Serial)(12 E1)(2 HSSI).
>2 FastEthernet/IEEE 802.3 interface(
>
>do you think this version has been affected?

Not 100% shure. Are you using dCEF?

Anyway, it is good idea to upgrade from Early Deployment software to Release
software.

-- 
Regards,
Volodymyr.