[nsp] 2611 Router Droping Errors.

[Voll, Scott]

Are both NICs configured at the same speed and duplex???  I'm not sure
this has anything to do with it, but I've found problems with cisco gear
running spanning tree and 3com NICs on M$ OSs.  I guess It's something
to look at.  

-Scott

-----Original Message-----
From: Victor M. Acosta [mailto:victorm at elpasotimes.com] 
Sent: Tuesday, May 20, 2003 6:43 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] 2611 Router Droping Errors.


    I have a 2611 attached into a 3com Switch on the DMZ and the
Internal NIC is dropping errors. I change the cable and still was
dropping errors. I change the 2611 to a 3550 and stop the errors
dramatically. However, I still have a lot of collisions. 

3751383 packets input, 3323907267 bytes, 0 no buffer
     Received 17265 broadcasts, 234405 runts, 0 giants, 0 throttles
     234405 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 17203 multicast, 0 pause input
     0 input packets with dribble condition detected
     2887948 packets output, 405334526 bytes, 4 underruns
     0 output errors, 127447 collisions, 0 interface resets
     0 babbles, 0 late collision, 270133 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     4 output buffer failures, 0 output buffers swapped out

    Is this because CISCO just do not like other brand os switches or I
have a bad router? Any one have seen this before.
Thanks.


Victor M. Acosta                                  El Paso Times
300 North Campbell St.                                 IT
El Paso TX, 79901                                 
Ph. (915) 546-6394                          victorm at elpasotimes.com
Fax.(915) 546-6346                          victorm at eudoramail.com
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/