[nsp] New image for a 2509...

[Eric Richard Knudson III]

Rick,

You could use 12.0.26, ip only. (you don't need anything more for a term
serv) 
It requires 8mb o flash, and 6mb o ram, so check your 'show ver' and
make sure you have enough memory.

http://tinyurl.com/c9nu


Eric

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Richard Golodner
Sent: Tuesday, May 20, 2003 9:43 AM
To: 'cisco-nsp at puck.nether.net'
Subject: [nsp] New image for a 2509...


	Hi all. I would appreciate it if someone could recommend a new
image for my 2509 that I am using to reverse telnet into my Cisco lab. I
had been using 11.0 (16) with 32k nvram and 8192k of flash. When I
looked at what was available on the Cisco site I was quickly confused as
I have never had to select an image before.
	Any! suggestions are appreciated as I need this to look at all
of my routers from one device.
				thank you, Richard Golodner
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/