[nsp] Cisco 3660 IP PLUS 12.2 Transcend memory problem

[Grega Zver]

I recently upgraded our cisco 3660 wit 2x 128 MB Transcend RAM end
everything works ok with images from 12.1 train (IP PLUS images also)
But when I tried to upgrade to 12.2 IP PLUS image router won't boot. It
works normaly with 12.2 IP only images.
I tried all different images from 12.2 train, but with everyone I get some
different kinf of errors.
Anyone had similar problems with transcend RAM ?

Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3660-I-M), Version 12.2(16), RELEASE SOFTWARE (fc3)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 06-Mar-03 23:41 by pwade
Image text-base: 0x60008940, data-base: 0x60A40000

ROM: System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)

AKT-SA-3660 uptime is 6 minutes
System returned to ROM by reload at 10:24:30 CET Fri May 23 2003
System image file is "flash:c3660-i-mz.122-16.bin"

cisco 3660 (R527x) processor (revision 1.0) with 253952K/8192K bytes of
memory.
Processor board ID JAC0618A05S
R527x CPU at 225Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
Bridging software.
X.25 software, Version 3.0.0.


3660 Chassis type: ENTERPRISE
2 FastEthernet/IEEE 802.3 interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
40960K bytes of processor board System flash (Read/Write)

Configuration register is 0x3D63

Thank you