[nsp] HSRP failing under high CPU load

[jlewis at lewis.org]

On Fri, 31 Oct 2003 atticus at satanic.org wrote:

> I'm guessing by the AMD FE, this is a 2600 series. If so, check to see if
> your release supports SPD, as I believe HSRP hellos will qualify for
> extended headroom. May still not make the difference, in which case

Actually, it's a PA in a 7206.

Slot 4:
        Fastethernet (TX-ISL) Port adapter, 2 ports
        Port adapter is analyzed 
        Port adapter insertion time 1d21h ago
        EEPROM contents at hardware discovery:
        Hardware revision 2.0           Board revision B0
        Serial number     16777352      Part number    73-2618-03
        Test history      0x0           RMA number     00-00-00
        EEPROM format version 1
        EEPROM contents (hex):
          0x20: 01 6C 02 00 01 00 00 88 49 0A 3A 03 00 00 00 00
          0x30: 58 00 00 00 00 02 26 00 00 00 FF FF FF FF FF 00

#sh controllers fastEthernet 4/0
Interface FastEthernet4/0
Hardware is AMD Am79c971
...

Are these newer or older than the DEC21140A version?

Slot 2:
        Fast-ethernet (TX-ISL) Port adapter, 1 port
        Port adapter is analyzed 
        Port adapter insertion time 1d21h ago
        EEPROM contents at hardware discovery:
        Hardware revision 1.4           Board revision B0
        Serial number     16412565      Part number    73-1688-05
        Test history      0x0           RMA number     00-00-00
        EEPROM format version 1
        EEPROM contents (hex):
          0x20: 01 11 01 04 00 FA 6F 95 49 06 98 05 00 00 00 00
          0x30: 58 00 00 00 00 01 05 00 FF FF FF FF FF FF FF FF

#sh controllers fastEthernet 2/0
Interface FastEthernet2/0
Hardware is DEC21140A
...

----------------------------------------------------------------------
 Jon Lewis *jlewis at lewis.org*|  I route
 Senior Network Engineer     |  therefore you are
 Atlantic Net                |  
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________