[nsp] ip verify unicast reverse-path confirmation?
Jared Mauch
jared at puck.nether.net
Thu Nov 6 15:21:05 EST 2003
On Thu, Nov 06, 2003 at 02:27:04PM -0500, Streiner, Justin wrote:
> On Thu, 6 Nov 2003, Bob Snyder wrote:
>
> > Is there any command to see the effects of the "ip verify unicast
> > reverse-path" command? Packet drop counters, etc?
>
> You can do a "sho ip int <interface>" and it will show you the number of
> packets that were dropped due to RPF checks. I don't think there is an
> equivalent that's accessible via SNMP. I looked for one a few weeks ago
> and didn't find anything.
fyi (yes, offtopic) the juniper rpf mib/oid is
.1.3.6.1.4.1.2636.3.17 = rpf mib (ifindex)
i always hate translating this stuff, so if i just saved you
some time, you're welcome :)
- jared
--
Jared Mauch | pgp key available via finger from jared at puck.nether.net
clue++; | http://puck.nether.net/~jared/ My statements are only mine.
More information about the cisco-nsp
mailing list