[nsp] atm encapsulation overhead
ivac at iskon.hr
Tue Nov 18 04:03:00 EST 2003
On Tue, Nov 18, 2003 at 12:50:26AM -0800, Dan Hollis wrote:
> > You can find information about overheads in different protocols
> > (Ethernet, ATM, POS, ...) here:
> > <URL:http://sd.wareonearth.com/~phil/net/overhead/>
> > On that page, under ATM section, is link to PS document which gives
> > details about overhead in IP/ATM networks.
> sadly the page and document merely describes aal5mux, but does not
> calculate it. they only deal with calculating and showing aal5snap.
Difference between aal5mux and aal5snap is 8 bytes (LLC/SNAP). So Table
6, in PS document, states this:
For aal5mux, just ignore that number and that's all (keep in mind
percentage is calculated for MTU = 576 bytes, so YMMV).
More information about the cisco-nsp