[nsp] EtherChannel

[adel mezibra]

It seems that the Catalyst series utilizes an X-OR operation on the last two
bits on the source destination MAC address whereas the router (like 75XX)
uses the last two bits of the X-OR of the IP address

--
adel mezibra


-----Message d'origine-----
De : cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net]De la part de Mikael
Abrahamsson
Envoye : jeudi 27 novembre 2003 14:10
A : cisco-nsp at puck.nether.net
Objet : Re: [nsp] EtherChannel


On Thu, 27 Nov 2003, Olav Langeland wrote:

> I understand that EtherChannel is not "real" bundling, but that you
> atleast achieve load balancing and redundancy in the link. Does anyone
> have experience with it in similar setup?

Some platforms will only loadbalance per destination MAC address. Not very
useful on router-router links.

--
Mikael Abrahamsson    email: swmike at swm.pp.se

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/