[nsp] OSPFv3

[Ryburn, Justin]

Do you have an IPv6 address on that Ethernet interface already?

Justin Ryburn
Tier II Router Support
XO Communications
Phone: (314) 787-7876
E-mail: justin.ryburn at xo.com



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Nicolas DEFFAYET
Sent: Wednesday, October 01, 2003 10:31 AM
To: Jared Mauch
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] OSPFv3


On Wed, 2003-10-01 at 17:21, Jared Mauch wrote:
> 	here's an example of a working ospfv3 config i have on
> one of my boxes.
> 
> IOS (tm) 3600 Software (C3640-IK9S-M), Version 12.3(3), RELEASE
SOFTWARE (fc2)
> !
> interface FastEthernet0/0
>  ipv6 address 3FFE:A00:F:1::1/126
>  ipv6 ospf 267 area 0
> !
> ipv6 router ospf 267
>  log-adjacency-changes
> !

brutus#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
brutus(config)#ipv6 router ospf 25358
brutus(config)#int Ethernet0
brutus(config-if)#ipv6 ospf ?
% Unrecognized command
brutus(config-if)#

Don't work for me :(

Thanks

Best Regards,

-- 
Nicolas DEFFAYET, NDSoftware
NDSoftware IP Network: http://www.ip.ndsoftware.net/
FNIX6 (French National Internet Exchange IPv6): http://www.fnix6.net/
EuroNOG: http://www.euronog.org/

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/