[nsp] Cisco 6509 with SUP1A-MSFC

[Mathias.Kenfack-Tabakem at telecity.com]

It does work but with some problems. You might have every now and then some
packet loss. If running a voice application, this will not be acceptable as
every minute you will have some packet loss due to BGP scanner. I will
advise you to increase you memory to 256M.

M.

-----Original Message-----
From: Deepak Jain [mailto:deepak at ai.net]
Sent: 03 October 2003 06:03
To: Cisco-Nsp at Puck. Nether. Net
Subject: [nsp] Cisco 6509 with SUP1A-MSFC



Has anyone recently run a SUP1A-MSFC (w/ 128MB of RAM) with success holding
a full BGP table?

Thanks,

DJ

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


This message has been scanned for viruses by MailControl -
www.mailcontrol.com


DISCLAIMER
This e-mail is intended only for the use of the addressees named above and
may be confidential. If you are not an addressee you must not use any
information contained in nor copy it nor inform any person other than
TeleCity or the addressees of its existence or contents. If you have
received this e-mail in error, please contact the TeleCity IT department on
+44 (0) 161 232 3220 or by email at techsupport at telecity.com. Internet
communications cannot be guaranteed 100% secure, you should therefore take
this potential lack of security into consideration when emailing us as we do
not accept legal responsibility for the security of the contents of this or
other emails. Whilst TeleCity take measures to prevent any virus
contamination of our computer systems, recipients of emails should always
ensure that they take their own precautions to avoid virus contamination.