[nsp] strange prob with Cat OS 6.4(5)

[Majid Siddiq]

try using portfast....majid

----- Original Message -----
From: "K.A. Long" <datgrl at hotmail.com>
To: <cisco-nsp at puck.nether.net>
Sent: Tuesday, October 28, 2003 6:05 PM
Subject: [nsp] strange prob with Cat OS 6.4(5)


> Hello,
>
> We recently upgraded our 6009 to 6.4(5).  Since the upgrade, certain
> connections on the switch fail
> to obtain an IP address, and the domain appears unreachable, as if the
port
> is in errdisable or
> down.
>
> The ports all appear to be error free.  show errdisable-timeout provides
no
> information.
> The port shows 'connected'. Syslog shows the port leaving/entering the
vlan
> when the
> person reboots their system.
>
> The only thing that seems to work is for the person to shut down the pc.
> Then
> we disable the port.  Then re-enable the port and have them start up.
>
> The only thing we can find on the Cisco website is a reference to a bug
when
> connections
> exceed 60 meters.  I don't believe this is the case here, though, because
in
> at least 2
> of the instances where this happens, the connections were about 50 feet
away
> from
> the switch.  There are plenty of IP addresses available so it's not an
> allocation problem.
>
> Anyone have any suggestions on any commands that might provide some
insight
> into
> what is going on?
>
> Thanks in advance.
>
> Kim
>
> _________________________________________________________________
> Want to check if your PC is virus-infected?  Get a FREE computer virus
scan
> online from McAfee.
> http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>