[nsp] Transport E1/T1 signal transparently over IP

[Temkin, David]

The manuals aren't anything to write home about, either.  Their
documentation flat out sucks (as does their UI), however the actual
technology does Just Work (tm) and we rarely have a problem with them.

-----Original Message-----
From: Robert E. Seastrom [mailto:rs at seastrom.com] 
Sent: Friday, October 31, 2003 7:02 AM
To: Temkin, David
Cc: 'Wim De Houwer'; cisco-nsp at puck.nether.net
Subject: Re: [nsp] Transport E1/T1 signal transparently over IP



"Temkin, David" <temkin at sig.com> writes:

> Your other option (and I currently use these) is to go with a box like 
> the IPMux-1 from RAD.  Check 
> http://www.rad-direct.com/Application-t1-t3-extension-t1-t3-over-ip.ht
> m for info.

I've used these and they Just Work (tm).

I have to say though that I do miss the days of RAD providing no manuals,
just a schematic with each device...

                                        ---Rob