[nsp] Config stored on 7200's?

[Jared Mauch]

On Tue, Sep 02, 2003 at 10:57:51AM -0400, Temkin, David wrote:
> And on the NPE-G1 it's on the NPE, then?

	I believe so.

	I'm not 100% sure where it stores it if you have
both the I/O controller and the NPE-G1 installed at the same time
(which is a valid combination).

	I would suspect it would use the NPE-G1 NVRAM instead of
the I/O controller NVRAM.

	If people want, I can probally post a photo of how to locate
the nvram if I find my digital camera ... (On the i/o controller that is)

	- jared

> -----Original Message-----
> From: Jared Mauch [mailto:jared at puck.nether.net] 
> Sent: Tuesday, September 02, 2003 10:57 AM
> To: Temkin, David
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [nsp] Config stored on 7200's?
> 
> 
> On Tue, Sep 02, 2003 at 10:48:36AM -0400, Temkin, David wrote:
> > Where is it stored?  On the NPE, or internally somwhere?  I'm pretty 
> > sure it's on the NPE but before changing anything I want to make sure.
> 
> 	I/O controller.
> 
> 	- jared
> 
> -- 
> Jared Mauch  | pgp key available via finger from jared at puck.nether.net
> clue++;      | http://puck.nether.net/~jared/  My statements are only mine.

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.